Introduction of Biomass Sawdust Coal/Charcoal Briquettes Making
Machine/Charcoal Rod Machine
Biomass rod making machine is to press biomass, rice husk, crops
straw (maize straw, soybean straw and others) or other carbonic
materials into solid fuel rods under the condition of high
temperature and high pressure. The machine is widely used in power
plants, chemical, energy, heating industry.
The working principle of Biomass Sawdust Coal/Charcoal Briquettes
Making Machine/Charcoal Rod Machine
After putting powdery materials into the machine inlet, the motor
drives the screw to rotate to press them into different shapes of
six arris or other forms.
Sleeves can be easily changed. Different shapes of sleeves make
different shapes of products.
1. Crush the raw material into small pieces (size is about 3-5mm),
if your raw material size is big;
2. Dry the material by the dryer machine or dried it in the sun,
till the moisture is less than 8%- 12%; if your raw material
moisture content is higher than 8-12%;
3. Put the dried material into feeding inlet of briquette machine
by worker or by screw conveyor;
4. Produce the briquette from the dried material without any
additive by the wood briquette machine;
5. Carbonized the briquette and become charcoal briquette.
Raw material request of Biomass Sawdust Coal/Charcoal Briquettes
Making Machine/Charcoal Rod Machine
Almost any biomass can be briquetted. the wood sawdust biomass
briquette machine are using Saw Dust, Bamboo dust, Bagasse, Cotton
Stalk, Coffee husk, Groundnut Shell, Mustard Husk/Stalk, Pine
Needles, Rice Husk, Sugar Mill Waste, Jute waste, Coir pith and
other wastes & residues like Castor Shell, Red Gram Stalk, Tobacco
stem, Tea Waste, Sander Dust, Tree Bark, Wild Grasses & Shrubs and
Sander dust etc. can be also be briquetted individually or in
combination without using any binder.
